Guard Pinup 3D Print
Another update to my Guard Pinup model. I set 'her up to print out 2 parts at once on my Wanhao Duplicator 7. This one is at 80mm or 1:22 scale. After clipping the supports off and curing the pieces, I primed and sanded them, and attached them to some little plastic bases I had lying around.
I've posted my .stl files over here on CG Trader too:
https://www.cgtrader.com/3d-print-models/miniatures/figurines/guard-with-whip-pinup
Thanks again to this guy for letting me use the sweet concept art!
https://www.artstation.com/artwork/R9d0D
Turn around of finished sculpt
Arranging .stl parts for 3D printing on my Wanhao D7
Arranging .stl parts for 3D printing on my Wanhao D7
Arranging .stl parts for 3D printing on my Wanhao D7
Figures after rising out of the resin vat
Cleaned off support material, figure is 80mm scale
Each figure is printed with 70 micron layers
Figure super-glued to base
Sprayed with Tamiya Grey primer.
Close-up showing some of the details
Concept used:
https://www.artstation.com/artwork/R9d0D
